Avoid using 802.11ac or the "wide" HT40 mode as the wider channels are faster but much more susceptible to interference.
Finally, let the Wi-Fi access point choose the 5GHz channel automatically. This will allow it to choose a DFS channel if supported by your hardware and permitted at your location. DFS channels are often less crowded than the rest of the 5GHz band.ĭisable sleep.
PRINTOPIA 2.1.23 .ZIP MAC
Your Mac must be awake for Printopia to work properly. In Printopia version 2.1.12 or later, under Advanced Settings there is a new option to "Keep machine awake while connected to line power". Checking this box will still allow your display to sleep, but will prevent your Mac from going to sleep entirely, causing your shared printers to disappear from the network.
You do not need this feature if you are able to get "Wake on Demand" working on your network. Make sure your printer works normally by printing from your Mac. If not, open System Preferences, click on "Printers and Scanners", select your printer, and click "Open Print Queue.". See if your printer is paused, or there's a job stuck in the queue. Click the "Resume" button if your queue is paused. If your Mac still cannot print to the printer in question, try removing your printer and re-adding it.
PRINTOPIA 2.1.23 .ZIP DRIVER
This reloads cached driver and network information for your printer and can resolve many printing issues.Ĭheck your firewall settings. (System Preferences-> Security-> Firewall). If your Firewall is turned on, click "Advanced", and ensure that "Printopia Server" is listed as allowing incoming connections. Alternatively, you may wish to temporarily turn off your firewall for troubleshooting purposes.Īlso make sure that the "Block all incoming connections" checkbox is not checked. If you are using Intego's firewall software, ensure that "Client, local server" is selected rather than "Client only" mode. Unfortunately, with iOS 8, this resolves problems like this more often than not. On an iPhone 6 or 6 Plus, hold the side button down for a few seconds until the "Slide to Power Off" screen appears. On an earlier iPhone, hold the top button instead.ĭisable printer sharing. Make sure your Mac's built-in printer sharing is turned OFF. If you don't see any printers in your iPhone or iPad's printer list: Open System Preferences, click Sharing, then make sure the Printer Sharing option is not enabled. Make sure your Mac is connected to the same network, either wirelessly or directly with an ethernet cable. Your iOS device must be able to communicate with Printopia in order for it to work.
0 kommentar(er)
